HOW TO CREATE TOKENS MWITU
How to Get; create free kplc Tokens mwitu.
In this post, i will take you through steps to how hackers get; create free kplc Tokens mwitu by bypassing and connecting to Kplc database. You may have come across such cheap tokens in one way or another. Before anything else, lets first learn how Kplc token system works.
The energy meter comes in the form of AT89S52 metering chip. The metering IC monitors the instantaneous load current and voltage signals and generates a frequency (pulse) that corresponds to instantaneous active power. The frequency of the instantaneous pulse is fed into the microcontroller (AT89S52), which stores the pulse count and the recharged Token units.
Depending on its count constant, the microcontroller decrements the recharge units by one unit each time a specified number of pulses are realized. When the recharged units are finally decremented to zero, the circuit relay is energized and it disconnects the electricity supply until the Tokens are loaded again. On recharge, the Token is received via the GSM based modem.
The microcontroller stores the units in the EEPROM and sends the data value to the LCD. At the same time, a boosted current signal is sent to activate the control relay, which finally connects the electricity supply to the premises. The smart card of the pre-paid energy meter communicates with the power utility server using GSM network, initiated either via power line communication or modem depending on the particular system.
Initially, the LCD registers the total amount of recharged units, called Recharged Amount (RA). But as the power is consumed, the LCD value decreases owing to circuit energy expenses, called Expenditure (E) at each instant and then subtracts from the Recharged Amount to obtain a Balance (B).
When the balance becomes zero, the Latch Relay is triggered to open and disconnected supply until the meter is recharged again.